M Series
Circular Modular Connectors
M1 and M3 Series universal industrial connectors are designed for safety and reliability also in harsh environments. Vibration, dust, aggressive liquids or vapours are often the cause of failures and serious safety problems. Sealed to IP67 or IP69K, our M1 and M3 Series circular connectors are dustproof, pressure proof and water protected when mated. They are also largely resistant to the effects of most acids and alkalis as well as the extremes of temperature.
The modular connector design allows many variations of assembly to fit your application:
Common features of M1 and M3 Series connectors:
.
Modular design: Customized and cost-effective realisation of your application
.
Shells: Various kinds of assembly, e.g. plug and receptacle shells with and without strain relief, with flange, for use with heat shrink boots or backshells with thread and cable gland, also flange-mount angled receptacle. Materials used:
.
Fibre glass reinforced polyamide: impact resistant
.
Design flexibility: Plug and receptacle shell can be fitted with either pin or socket insert, i.e. fully insulated socket inserts can be mounted on the live part.
Special features of M1 Series:
.
Number of contacts: 4 and 6 + PE
.
5,000 mating cycles at constant low contact resistance
.
Current rating: 16 A max.
.
Orientation: Pin and socket inserts can be located in the shell in two different positions, thus preventing mismating. It also allows for the unmistakable connection of for example two connectors with different voltages to one and the same piece of equipment.
.
Contacts:
.
High-quality screw machine contacts
.
Silver or gold plated
Special features of M3 Series:
.
Number of contacts: 6 + PE, 5+3 + PE, 12 + PE and 7+7 + PE
.
5,000 mating cycles at constant low contact resistance
.
Current rating: 50 A max.
You can use our M1 and M3 Series connectors for various applications, especially where high reliability under harsh environmental conditions is important. Typical applications are: mining, ship-building, power plant construction, mechanical and traffic engineering, lighting engineering, environmental technology or food processing. We hold numerous official approvals.
IEC 61984 EN 60529 DIN 15560-104
UL 94-V0
Connectors – Safety requirements and tests Ingress protection rating of enclosures (IP-Code) Projectors for film and television studios, stage and
photographic use – Part 104: Daylight projector systems up to 4.000 W rated power and special connectors
T1-x Cable sleeve M16 Z / M16 ZB Cable plug with backshell, strain relief and cable gland SAC-x.xx-yy Pin contact M1 E-4P+PE Pin insert
M1KS
Pg M1 Pg13,5 10-12 Pg Pg M1 Pg13,5 M16 Cable plug with backshell and cable gland BAC-x.xx-yy Socket contact M1 E-4S+PE Socket insert
Cable gland Pg13.5 Backshell Pg13.5
M M Pg M15 Flange plug BS-A-V10 Filler plug M1 E-6P+PE Pin insert
M1 VM20 8-13 M1 M20
Cable gland M20x1,5 Backshell M20x1,5 Pg M1 K Protection cap
M16 W Threaded plug for use with backshell/ shrink boot M1 E-6S + PE
222K142-15
Shrink boot, 90°
202K142-15
Shrink boot, straight
T28-x Cable sleeve M36 Z / M3 36ZB Cable plug with backshell, strain relief and cable gland SAC-x.xx-yy SBC-x.xx-yy PC-C/x.xx-yy Pin contact M3 E-6P+PE Pin insert
M3 E-6S+PE Socket insert M3 KS Protection cap for plugs
222K142-15 M35 Flange plug BAC-x.xx-yy BBC-x.xx-yy-20 SC-C/x.xx-yy M3 E-5P+3P+PE
Shrink boot, 90° Socket contact Pin insert
BS-A-V10
202K163-15 Shrink boot, straight M36W Threaded plug for use with backshell/ shrink boot BS-B-V10 BS-C-V10 Filler plug M3 E-5S+3S+PE Socket insert M3K Protection cap for plugs
M3 E-12P+PE
Pin insert
M3 VPg21 14-18 M3 Pg21
Cable gland Pg21 Backshell Pg21
M3 E-12S+PE
Socket insert
M3 VM25 11-17 Cable gland M25x1.5 M3 M25 Backshell M25x1.5 M3 E-7P+7P+PE Pin insert
M3 E-7S+7S+PE
Socket insert
schaltbau.com
M1DS
Protection cap for receptacles
M1D
Protection cap for receptacles
M3DS
Protection cap for receptacles
M3D
Protection cap for receptacles
M1 E-4P+PE
Pin insert
M1 E-4S+PE
Socket insert
M1 E-6P+PE
Pin insert
M1 E-6S + PE
Socket insert
M3 E-6P+PE
Pin insert
M3 E-6S+PE
Socket insert
M3 E-5P+3P+PE
Pin insert
M3 E-5S+3S+PE Socket insert
M3 E-12P+PE
Pin insert
M3 E-12S+PE
Socket insert
M3 E-7P+7P+PE
Pin insert
M3 E-7S+7S+PE Socket insert
SAC-x.xx-yy
Pin contact
BAC-x.xx-yy
Socket insert
BS-A-V10
Filler plug
SAC-x.xx-yy SBC-x.xx-yy PC-C/x.xx-yy
Pin contact
BAC-x.xx-yy BBC-x.xx-yy-20 SC-C/x.xx-yy
Socket contact
BS-A-V10 BS-B-V10 BS-C-V10
Filler plug
M11 Z / M11 ZB
Cable receptacle with backshell, strain relief and cable gland
M11
Cable receptacle with backshell and cable gland
Pg
M14 Pg13,5
Pg13.5 threaded receptacle
M
M14 M20
M20x1.5 threaded receptacle
M13
Flange mount receptacle
M18
Flange mount angled receptacle
M31 Z / M31 ZB
Cable receptacle with backshell, strain relief and cable gland
M33
Flange mount receptacle
M33W
Receptacle for use with shrink boot
M34 Pg21
Pg21 threaded receptacle
M34 M30
M30x1.5 threaded receptacle
M38
Flange mount angled receptacle
T1-x
Cable sleeves
M1 M20D
Backshell M20x1.5
T28-x
Cable sleeve
222K142-15
Shrink boot, 90°
202K163-15
Shrink boot, straight
M3 Pg16
Backshell Pg16
M3 Pg21
Backshell Pg21
Pg M
M3 M25D
Backshell M25x1.5
M1 VM20 8-13
Cable gland M20x1.5
M3 VPg21 14-18
Cable gland Pg21
M3 VM25 11-17
Cable gland M25x1.5
Our M1 and M3 Series connectors consist of various components which assembly. The following table is a summary of all available individual you can order individually, thus assembling a connector that suits your components of our M1 and M3 Series connectors. application to a T.
Please note that according to our price list minimum order quantities apply. Our “Overview” on pages 4 and 5 will help you with the details of the For orders below that minimum our distributors will be at your service.
Item Depiction Ordering code Brief description
M1 M3
Shell Part 1 Receptacles
M11 Z M11 ZB M31 Z M31 ZB Cable receptacle with backshell, strain relief and cable gland ZB: Kit of loosely packed components
M11 – Cable receptacle with backshell and cable gland
M13 M33 Flange mount receptacle
– M33 W Receptacle for use with shrink boot
PG threaded receptacle for use with PG threaded backshell Metric threaded receptacle for use with metric threaded backshell
M18 M38 Flange mount angled receptacle
Shell Part 1 Plugs
M16 Z M16 ZB M36 Z M36 ZB Cable plug with strain relief ZB: Kit of loosely packed components
M16 – Cable plug with cable gland
M16 W M36 W PG threaded plug for use with PG threaded backshell or shrink boot
M15 M35 Flange plug
Shell Part 2 Backshells, cable sleeves/ seals
202K142-15 (Raychem) 202K163-15 (Raychem) Shrink boot, straight (order direct from Raychem or other OEMs)
222K142-15 (Raychem) 222K163-15 (Raychem) Shrink boot, 90° (order direct from Raychem or other OEMs)
M1 M20D M3 M25D Backshell with PG threaded front skirt and metric threaded rear skirt
Cable glands
M1 VPg13.5 10-12 *1 M3 VPg21 14-18 PG threaded cable gland *1 Use only if configured as a plug
M1 VM20 8-13 M3 VM25 11-17 Metric
Protection caps
M1 KS M1 DS M3 KS M3 DS Protection cap with cord for plugs Protection cap with cord for receptacles
M1 K M1 D M3 K M3 D Protection cap with plastic strap for plugs Protection cap with plastic strap for receptacles
Inserts PE M1 E-4P+PE M1 E-4S+PE –– 4 + PE pin insert for contacts SAC-x / PE: BAC-x 4 + PE socket insert for contacts BAC-x / PE: SAC-x
PE M1 E-6P+PE M1 E-6S+PE –– 6 + PE pin insert for contacts SAC-x / PE: BAC-x 6 + PE socket insert for contacts BAC-x / PE: SAC-x
PE –– M3 E-6P+PE M3 E-6S+PE 6 pole+ PE pin insert for contacts SBC-x / PE: BBC-x-20 6 pole+ PE socket insert for contacts BBC-x-20 / PE: SBC-x
PE –– M3 E-5P+3P+PE M3 E-5S+3S+PE 5+3 + PE pin insert for contacts PC-C/x, SAC-x / PE: SC-C/x 5+3 pole+ PE socket insert for contacts SC-C/x, BAC-x / PE: PC-C/x
PE –– M3 E-12P+PE M3 E-12S+PE 12 + PE pin insert for contacts SAC-x / PE: BAC-x 12 + PE socket insert for contacts BAC-x / PE: SAC-x
PE –– M3 E-7P+7P+PE M3 E-7S+7S+PE 7+7 + PE pin insert for contacts SAC-x / PE: BAC-x 7+7 + PE socket insert for contacts BAC-x / PE: SAC-x
Contact type A
SAC-0.50-Ag …/Au SAC-1.00-Ag …/Au SAC-1.50-Ag …/Au SAC-2.50-Ag SAC-0.50-Ag …/Au SAC-1.00-Ag …/Au SAC-1.50-Ag …/Au SAC-2.50-Ag Wire gauge AWG20 (0.50 mm²) AWG18 … 17 (0.75 … 1.00 mm²) AWG15 (1.50 mm²) AWG13 (2.50 mm²)
BAC-0.50-Ag …/Au BAC-1.00-Ag …/Au BAC-1.50-Ag …/Au BAC-2.50-Ag BAC-0.50-Ag …/Au BAC-1.00-Ag …/Au BAC-1.50-Ag …/Au BAC-2.50-Ag Wire gauge AWG20 (0.50 mm²) AWG18 … 17 (0.75 … 1.00 mm²) AWG15 (1.50 mm²) AWG13 (2.50 mm²)
BS-A-V10 BS-A-V10 Filler plug for unused contact cavities
Contact type B
–––––– SBC-0.50-Ag SBC-1.00-Ag SBC-1.50-Ag …/Au SBC-2.50-Ag …/Au SBC-4.00-Ag SBC-6.00-Ag Wire gauge AWG20 (0.50 mm²) AWG18 … 17 (0.75 … 1.00 mm²) AWG15 (1.50 mm²) AWG13 (2.50 mm²) AWG11 (4.00 mm²) AWG9 (6.00 mm²)
––––– BBC-1.00-Ag-20 BBC-1.50-Ag-20 …/Au BBC-2.50-Ag-20 …/Au BBC-4.00-Ag-20 BBC-6.00-Ag-20 Wire gauge AWG18 … 17 (0.75 … 1.00 mm²) AWG15 (1.50 mm²) AWG13 (2.50 mm²) AWG11 (4.00 mm²) AWG9 (6.00 mm²)
– BS-B-V10 Filler plug for unused contact cavities
Contact type C
––– PC-C/2.50-Ag PC-C/4.00-Ag PC-C/6.00-Ag Wire gauge AWG13 (2.50 mm²) AWG11 (4.00 mm²) AWG9 (6.00 mm²)
––– SC-C/2.50-Ag SC-C/4.00-Ag SC-C/6.00-Ag Wire gauge AWG13 (2.50 mm²) AWG11 (4.00 mm²) AWG9 (6.00 mm²)
– BS-C-V10 Filler plug for unused contact cavities
M16 Z, M16 ZB, M16, M15, M16 W Plug shells, Part 1 M1 series
. M16 Z, M16 ZB Cable plug with backshell, strain relief and cable gland
*
Tr26x2
. M16 Cable plug with backshell and cable gland
Tr26x2
. M15 Flange plug
Ordering code
Description
Cable plug with backshell,
M16 Z
strain relief and cable gland**
Kit M16Z
M16 ZB
All components are loosely packed**
Note:
* To prevent the strain relief from loosening use two self-tapping cylinder head screws 2.2 x 9.5 (not included in delivery)
** Cable sleeve T1-x required All M1 inserts can be used with these plugs
Ordering code
Description
Plug with backshell and
M16
cable gland**
Note:
** Cable sleeve T1-x required All M1 inserts can be used with this plug
Ordering code
Description
M15
Flange plug
Ø20.4
Plug with threaded rear skirt (for use with backshell or shrink boot)
Ø3.2 3441
All M1 inserts can be used with this plug
.
Mounted with M3 screws, torque 2.5 Nm.
Ordering code
Description
Ø19
Plug with threaded rear skirt for use with backshell
M16 W
. M11 Z, M11 ZB Cable receptacle with backshell, strain relief and cable gland
Ordering code Description
M11 Z Cable receptacle with back-shell, strain relief and cable gland**
M11 ZB Kit M11Z All components loosely packed**
. M11 Cable receptacle with backshell and with cable gland
Ordering code Description
M11 Cable receptacle with back-shell and cable gland**
Note:
** Cable sleeve T1-x required All M1 inserts can be used with this receptacle
. M13 Flange mount receptacle
Ordering code Description
M13 Flange mount receptacle
Note:
.
All M1 inserts can be used with this receptacle
.
Mounted with M3 screws, torque 2.5 Nm.
. M14 Pg13,5, M14 M20 Receptacle with threaded rear skirt (for use with backshell)
Ordering code Description
M14 Pg13,5 Receptacle with Pg13.5 threaded rear skirt
M14 M20 Receptacle with M20x1.5 threaded rear skirt for use with backshell M1 M20D
Note:
.
All M1 inserts can be used with these receptacles
.
Receptacle can also be box mounted, torque 2.5 Nm.
. M18 Flange mount angled receptacle
Ordering code Description
M18 Flange mount angled receptacle
Note:
. All M1 inserts can be used with this receptacle
.
M1 Pg13,5 Pg13.5 threaded backshell . M1 VPg13,5 10-12 Pg13.5 threaded cable gland
.
M1 M20, M1 M20D M20x1.5 threaded backshell . M1 VM20 8-13 M20x1.5 threaded cable gland
Ordering code Description
M1 M20 Backshell with Pg13.5 threaded front skirt and M20x1.5 threaded rear skirt for use with plug M16 W
M1 M20D Backshell with M20x1.5 threaded front and rear skirt for use with receptacle M14 M20
. T1-4/6, … , T1-12/13 Cable sleeve,
T1-14.5 Sealing ring,
Ordering code Fig. Description
T1-4/6 A cable-Ø 4 … 6 mm
T1-6/8 A cable-Ø 6 … 8 mm
T1-8/10 A cable-Ø 8 … 10 mm
T1-10/12 A cable-Ø 10 … 12 mm
T1-12/13 A cable-Ø 12 … 13 mm
T1-14.5 B cable-Ø 14 … 15 mm
Note: . For use with M16, M16 Z, M16 ZB Series cable plugs . For use with M11, M11 Z, M11 ZB Series cable receptacles
222K142-15, 202K142-15 Shrink boots, Shells Part 2 M1 series
. 222K142-15 Shrink boot, 90° . 202K142-15 Shrink boot, straight
Ordering code Description
222K142-15 * Shrink boot, 90°
202K142-15 * Shrink boot, straight
Note:
. For use with M16 W Series plug
. Cable diameter Ø 7.1 mm min.
* Order direct from Raychem
M1 KS, M1 K Protection caps for plugs M1 DS, M1 D Protection caps for receptacles M1 series
M1 KS M1 K M1 DS M1 D
Ordering code Description
M1 KS Protection cap with cord for plugs
M1 K Protection cap with plastic strap for plugs
Ordering code Description
M1 DS Protection cap with cord for receptacles
M1 D Protection cap with plastic strap for receptacles
. Pin insert M1 E-4P+PE . Socket insert M1 E-4S+PE
. Pin insert M1 E-6P+PE . Socket insert M1 E-6S+PE
M1 Series: Number of contacts, max. 4 + PE 6 + PE
Ordering code Pin insert Socket insert M1 E-4P+PE M1 E-4S+PE M1 E-6P+PE M1 E-6S+PE
Contact arrangement Contact identification as marked on insert: Pin insert: Rear view Socket insert: Front view PE 1 4 2 3 PE 1 5 6 2 4 3
Rated voltage (IEC 60038) At pollution degree PD3 (IEC 60512) 230 V / 400 V 250 V
Orientations 2 (A, B) 2 (A, B)
Contacts Current rating of individual contacts, max.*1 Contact diameter Contact Type*2 Pin insert Socket insert 4x 16 A Ø 1.58 mm Pins SAC-x / PE socket BAC-x Sockets BAC-x / PE pin SAC-x 6x 16 A Ø 1.58 mm Pins SAC-x / PE socket BAC-x Sockets BAC-x / PE pin SAC-x
Empty cavities should be fitted with filler plugs.
. M36 Z, M36 ZB Cable plug with backshell, strain relief and cable gland
Ordering code Description
M36 Z Cable plug with backshell, strain relief and cable gland**
M36 ZB Kit M36 Z All components loosely packed.**
Note:
* To prevent the strain relief from loosening use two self-tapping cylinder head screws 2.9x 13 (not included in delivery)
** Cable sleeve T28-x required All M3 inserts can be used with these plugs
. M35 Flange plug
Ordering code Description
M35 Flange plug
Note:
.
All M3 inserts can be used with this plug
. M36 W Plug with threaded rear skirt (for use with backshell or shrink boot)
Ordering code Description
M36 W Plug with threaded rear skirt for use with backshells M3 Pg16, M3 Pg21, M3 M25, or shrink boot
.
Plug can also be box mounted, torque 2.5 Nm.
. M31 Z, M31 ZB Cable receptacle with backshell, strain relief and cable gland
Ordering code Description
M31 Z Cable receptacle with back-shell, strain relief and cable gland**
M31 ZB Kit M31 Z All components loosely packed.**
Note:
* To prevent the strain relief from loosening use two self-tapping cylinder head screws 2.9x 13 (not included in delivery)
** Cable sleeve T28-x required All M3 inserts can be used with these receptacles
. M33 Flange mount receptacle
Ordering code Description
M33 Flange mount receptacle
Note:
.
All M3 inserts can be used with this receptacle
.
Mounted with M4 screws, torque 2.5 Nm.
. M33 W Receptacle for use with shrink boot
Ordering code Description
M33 W Receptacle for use with shrink boot
Note:
. All M3 inserts can be used with this receptacle
. M34 Pg21, M34 M30 Receptacle with Pg21 or M30x1.5 threaded rear skirt
Ordering code Description
M34 Pg21 Receptacle with Pg21 threaded rear skirt for use with: backshell M3 Pg16 backshell M3 Pg21 backshell M3 M25D
M34 M30 Receptacle with M30x1.5 threaded rear skirt for use with backshell M3 M25D
Note:
.
All M3 inserts can be used with these receptacles
.
Receptacle can also be box mounted, torque 2.5 Nm.
. M38 Flange mount angled receptacle
Ordering code Description
M38 Flange mount angled receptacle
Note:
. All M3 inserts can be used with this receptacle
. threaded backshells . M3 VPg21 14-18 Pg21 threaded cable glands
.
M3 M25, M3 M25D M25x1.5 threaded backshells . M3 VM25 11-17 M25x1.5 threaded cable gland
Ordering code Description
M3 Pg16 Backshell with Pg21 threaded front and Pg16 threaded rear skirt for use with plug M36 W and receptacle M34
M3 Backshell with threaded front and rear skirt for use with plug M36 W and receptacle M34
Ordering code Description
– Pg16 threaded cable gland (OEM part)
M3 VPg21 14-18 Pg21 threaded cable gland for use with backshell M3 Pg21
Ordering code Description
M3 M25 Backshell with Pg21 threaded front and M25x1.5 threaded rear skirt for use with plug M36 W
M3 M25D Backshell with Pg21 threaded front and M25x1.5 threaded rear skirt for use with receptacle M34 Pg21
. T28-xx/xx Cable sleeves
Ordering code Description
T28-10/13 cable-Ø 10 … 13 mm
T28-13/16 cable-Ø 13 … 16 mm
T28-16/18.5 cable-Ø 16 … 18.5 mm
T28-18.5/20.5 cable-Ø 18.5 … 20.5 mm
T28-20.5/22 cable-Ø 20.5 … 22 mm
Note:
.
For use with M36, M36 Z, M36 ZB Series cable plugs
.
For use with M31 Z, M31 ZB Series cable receptacles
. 222K163-15 Shrink boot, 90° . 202K163-15 Shrink boot, straight
Ordering code Description
222K163-15 * Shrink boot, 90°
202K163-15 * Shrink boot, straight
Note:
.
For use with M36 W Series plug and M33 W Series receptacle
.
Cable diameter Ø 9.9 mm min.
* Order direct from Raychem
M3 KS, M3 K Protection caps for plugs M3 DS, M3 D Protection caps for receptacles M3 series
M3 KS M3 K M3 DS M3 D
Ordering code Description
M3 KS Protection cap with cord for plugs
M3 K Protection cap with plastic strap for plugs
Ordering code Description
M3 DS Protection cap with cord for receptacles
M3 D Protection cap with plastic strap for receptacles
M3 E-6P+PE / E-5P+3P+PE / E-12P+PE / E-7P+7P+PE Pin inserts 6, 5+3, 12 and 7+7 pole + PE M3 E-6S+PE / E-5S+3S+PE / E-12S+PE / E-7S+7S+PE Socket inserts 6, 5+3, 12 and 7+7 pole + PE M3 series
.
Pin insert M3 E-6P+PE . Socket insert M3 E-6S+PE
.
Pin insert M3 E-5P+3P+PE . Socket insert M3 E-5S+3S+PE
.
Pin insert M3 E-12P+PE . Socket insert M3 E-12S+PE
.
Pin insert M3 E-7P+7P+PE . Socket insert M3 E-7S+7S+PE
M3 Series: Number of contacts, max. 6 + PE 5+3 + PE 12 + PE 7+7+ PE
Ordering code Pin insert Socket insert M3 E-6P+PE M3 E-6S+PE M3 E-5P+3P+PE M3 E-5S+3S+PE M3 E-12P+PE M3 E-12S+PE M3 E-7P+7P+PE M3 E-7S+7S+PE
Contact arrangement Contact identification as marked on insert: Pin insert: Rear view Socket insert: Front view 1 5 2 6 4 3 PE 65 7 4 82 3 1 PE 19 2 8 10 3 7 12 11 4 6 5PE 19 2 8 10 313 14 7 12 11 4 6 5PE
Rated voltage (IEC 60038) At pollution degree PD3 (IEC 60512) 230 V / 400 V 1 … 6 230 V / 400 V 25 V 1 … 3 4 … 8 250 V 1 … 12 250 V 200 V 1, 2, 4, 5, 6, 7, 9 3,8,10 … 14
Orientations 2 1 2 2
Contacts Current rating of individual contacts, max. *1 Contact diameter Contact Type *2 Pin insert Socket insert 6x 32 A Ø 2.30 mm SBC-x / PE: BBC-x-20 BBC-x-20x / PE: SBC-x 3x 50 A 5x 16 A Ø 4.0 mm Ø 1.58 mm PC-C/x / dto. PE*3 SAC-x SC-C/x / dto. PE*3 BAC-x 12x 16 A Ø 1.58 mm SAC-x / PE: BAC-x BAC-x / PE: SAC-x 14x 16 A Ø 1.58 mm SAC-x / PE: BAC-x BAC-x / PE: SAC-x
*1 Depending on wire gauge (see »Specifications«, page 3) as well as operating temperature (see»Derating diagrams«, page 19)
*2 For a detailed description see »Contacts«, page 18
*3 Mind that only with the 8 pole inserts the PE contact is of the same contact gender. With the other inserts it is of the opposite gender.
Note:
Empty cavities should be fitted with filler plugs.
. SAC-x, BAC-x, BS-A-V10 Crimp contacts (pin/socket) and filler plug, type Contacts
Pin contacts, silver plated Socket contacts, silver plated Filler plug: Specifications BS-A-V10: Empty cavities can be fitted with filler plugs
Ordering code L1 Identification
SAC-0.50-Ag 28.6 No groove
SAC-1.00-Ag 28.6 1 groove
SAC-1.50-Ag 28.6 2 grooves
SAC-2.50-Ag 28.6 3 grooves
Ordering code L2 Identification
BAC-0.50-Ag 28.6 No groove
BAC-1.00-Ag 28.6 1 groove
BAC-1.50-Ag 28.6 2 grooves
BAC-2.50-Ag 28.6 3 grooves
Wire gauge Current rating
AWG 20 (0.5 mm²) 7.5 A
AWG18…17 (0.75 … 1 mm²) 10 A
AWG15 (1.5 mm²) 16 A
AWG13 (2.5 mm²) 16 A
Pin contacts, gold plated
Socket contacts, gold plated
Specifications
Ordering code L1 Identification
SAC-0.50-Au 28.6 No groove
SAC-1.00-Au 28.6 1 groove
SAC-1.50-Au 28.6 2 grooves
Ordering code L2 Identification
BAC-0.50-Au 28.6 No groove
BAC-1.00-Au 28.6 1 groove
BAC-1.50-Au 28.6 2 grooves
Wire gauge Current rating
AWG 20 (0.5 mm²) 7.5 A
AWG18…17 (0.75 … 1 mm²) 10 A
AWG15 (1.5 mm²) 16 A
. SBC-x, BBC-x-20, BS-B-V10 Crimp contacts (pin/socket) and filler plug, type
Filler plug: BS-B-V10: Empty cavities can be
fitted with filler plugs
Pin contacts, silver plated Socket contacts, silver plated Specifications
Ordering code L1 Identification
SBC-0.50-Ag 40.4 No groove
SBC-1.00-Ag 40.4 1 groove
SBC-1.50-Ag 40.4 2 grooves
SBC-2.50-Ag 39.0 3 grooves
SBC-4.00-Ag 39.0 1 wide groove
SBC-6.00-Ag 39.0 2 wide grooves
Ordering code L2 Identification
– – –
BBC-1.00-Ag-20 37.0 1
BBC-1.50-Ag-20 37.0 2
BBC-2.50-Ag-20 35.6 3
BBC-4.00-Ag-20 35.6 4
BBC-6.00-Ag-20 35.6 5
Wire gauge Current rating
AWG 20 (0.5 mm²) 7.5 A
AWG17 (1.0 mm²) 10 A
AWG15 (1.5 mm²) 16 A
AWG13 (2.5 mm²) 27.5 A
AWG 11 (4.0 mm²) 35 A
AWG9 (6.0 mm²) 35 A
Pin contacts, gold plated
Socket contacts, gold plated
Specifications Daten
Ordering code L1 Identification
SBC-1.50-Au 40.4 2 grooves
SBC-2.50-Au 39.0 3 grooves
Ordering code L2 Identification
BBC-1.50-Au-20 37.0 2
BBC-2.50-Au-20 35.6 3
Wire gauge Current rating
AWG15 (1.5 mm²) 16 A
AWG13 (2.5 mm²) 27.5 A
. PC-C/x, SC-C/x, BS-C-V10 Crimp contacts (pin/socket) and filler plug, type
Filler plug: BS-C-V10: Empty cavities can be
fitted with filler plugs
Pin contacts, silver plated Socket contacts, silver plated Specifications
Ordering code L1 Identification
PC-C/2.50-Ag 37.5 3 grooves
PC-C/4.00-Ag 37.5 1 wide groove
PC-C/6.00-Ag 37.5 2 wide grooves
Ordering code L2 Identification
SC-C/2.50-Ag 32.6 3 grooves
SC-C/4.00-Ag 32.6 1 wide groove
SC-C/6.00-Ag 32.6 2 wide grooves
Wire gauge Current rating
AWG13 (2.5 mm²) 27.5 A
AWG 11 (4.0 mm²) 35 A
AWG9 (6.0 mm²) 50 A
Schaltbau crimp tool CWZ-600-1 (see page 21) for all contacts . Fill the empty cavities with filler plugs from the mating face except SAC-2.50-xx and BAC-2.50-xx. For SAC-2.50-xx and BAC-2.50-xx contacts we
. PE (protection earth) contacts must be of the same AWG size as the main contacts.
. Derating curve M1 E4P+PE and M1 E4S+PE . Derating curve M1 E6P+PE and M1 E6S+PE
M3 E6P+PE and M3 E6S+PE . Derating curve M3 E5P+3P+PE and M3 E5S+3S+PE
D M3 E12P+PE and M3 E12S+PE . Derating curve M3 E7P+7P+PE and M3 E7S+7S+PE
.
Extraction tool . Crimp tool
Ordering code Insertion tools for
VW-M1 E-4/6S+PE Contact insert M1 E-4S+PE
Contact insert M1 E-6S+PE
VW-M3 E-6S Contact insert M3 E-6S+PE
VW-M3 E-5S+3S+PE Contact insert M3 E-5S+3S+PE
VW-M3 E-7+7/12S+PE Contact insert M3 E-12S+PE, M3 14S+PE
Ordering code Insertion tools for
VW-M1 E-4P Contact insert M1 E-4P+PE
VW-M1 E-6P Contact insert M1 E-6P+PE
VW-M3 E-6P Contact insert M3 E-6P+PE
VW-M3 E-5P+3P Contact insert M3 E-5P+3P+PE
VW-M3 E-12P Contact insert M3 E-12P+PE, M3 14P+PE
Ordering code Extraction tool for
ETC-A Contact type SAC-x, BAC-x
ETC-B Contact type SBC-x, BBC-x-20
ETC-C/H Contact type PC-C/x, SC-C/x
| 1-1402-153125 |
| 1-1402-173959 |
| 1-1402-193010 |
| 1-1402-193021 |
| 1-1402-193521 |
| 1-1402-194784 |
| 1-1402-194795 |
| 1-1402-236710 |
| 1-1402-236754 |
| 1-1402-242747 |
| 1-1402-267894 |
| 1-1402-302519 |
| 1-1402-348216 |
| 1-1402-348217 |
| 1-1402-348306 |
| 1-1402-781629 |
| 1-1402-801723 |
| 1-1402-907003 |
| 1-1402-908051 |
| 1-1402-908062 |
| 1-1402-908095 |
| 1-1402-908108 |
| 1-1402-981487 |
| 1-1402-981501 |
| 1-1402-981523 |
| 1-1402-981534 |
| 1-1402-981545 |
| 1-1402-981556 |
| 1-1402-981567 |
| 1-1402-981578 |
| 1-1402-981589 |
| 1-1402-981590 |
